WEDGIE JR. (Set of 3) Jr. Wedgie blocks measure 5.5” long x 2.75” high x 1.8” wide. Used to hold 3-D projects while you solder. Three in this set gives you lots of support. Made of soft rubber.  Unit: Set of 3	TGM3111	[ 0.4 lb. ]
		WIRE BRUSH, Stainless Steel Bristles Long lasting stainless steel bristles for pre-soldering cleaning of cames, zinc, etc.  Unit: EACH	TLS1010	[ 0.1 lb. ]
		WIRE BRUSH, BRASS BRISTLES Softer brass bristles prevent scratching of soft glasses. Good also for gentle brushing of corroded lead for repairs.  Unit: EACH	TLB1020	[ 0.1 lb. ]
		ACID BRUSH (Flux, Patina Brush) Horse hair bristles. For fluxing and applying patinas. (Keep separate brushes for each chemical.)  Unit: EACH	TSA4040	[ < 0.1 lb. ]
		SOLDERING IRON CONTROLLER PRO Solid state iron control with 800 watt capacity. Use for irons without built-in automatic temperature controls. Has power on indicator. 110v  Unit: EACH	TSC1596	[ 0.5 lb. ]
		INLAND SOLDERING STATION Organizes your tools and supplies for soldering. Includes an iron stand, rheostat for controlling iron temp, flux & brush holder, sponge. See Add'tl. Info for more.  Unit: EACH	TSC1598	[ 2 lbs. ]
		Hakko AH-60 watt Soldering Iron HAKKO #503 red handled soldering iron for hobbyists. A lightweight iron with excellent performance. Includes a 3/16" chisel tip ideal for copper foil soldering with 60/40 solder. 60 watts  Unit: EACH	TSH6000	[ 0.3 lb. ]
		Replacement Tip, AH-60 (3/16 in.) HAKKO Replacement tip for AH-60 (#503) iron (60 watt) ( TSH6000 ) 7/32" shafted 3/16” chisel tip.  Unit: EACH	TST6000	[ 0.1 lb. ]
		Hakko AH-80 watt Soldering Iron HAKKO AH-80 wood handled iron. 80 watts. May look similar to other irons, but these are high quality and made to last. 120v 3/16” chisel tip (on a 1/4" shaft)  Unit: EACH	TSH8000	[ 0.4 lb. ]
		Replacement TIP for Hakko AH-80 HAKKO Replacement tip for AH-80 iron (80 watt) ( TSH8000 ) 1/4" shafted 3/16” chisel tip.  Unit: EACH	TST8000	[ 0.1 lb. ]
		Hakko AH-100 watt Soldering Iron HAKKO AH-100 wood handled iron. 100 watts. May look similar to other irons, but these are high quality and made to last. 120v 3/16” chisel tip (on a 5/16" shaft)  Unit: EACH	TSH1002	[ 0.4 lb. ]
		Replacement TIP for Hakko AH-100 HAKKO Replacement tip for AH-100 iron (100 watt) ( TSH1000 ) 5/16" shafted 3/16” chisel tip.  Unit: EACH	TST1000	[ 0.1 lb. ]
		Hakko 456 Professional Series Iron HAKKO #456-16P High performance Super Pro 1000 degree iron, 63 watts. Long life ceramic heating element. Beginners: best used with rheostat. 3/16" Excellent iron!  Unit: EACH	TSH6060	[ 0.7 lb. ]
		IRON STAND FOR AH-456 HAKKO High quality stand recommended by Hakko for the Hakko heavy-duty iron AH-456 (TSH6060).  Unit: EACH	TSS3000	[ 1.3 lbs. ]
		Replacement Tip, AH-456 (3/16in.) HAKKO Replacement tip for AH-456 iron (60 watt) ( TSH6060 ) 3/16” Chisel Tip.  Unit: EACH	TST6060	[ 0.1 lb. ]
		Replacement Tip, AH-456 (3/8 in.) HAKKO Replacement tip for AH-456 iron (60 watt) ( TSH6060 ) 3/8” Chisel Tip.  Unit: EACH	TST6065	[ 0.1 lb. ]
		Portable Soldering Iron, 60 watt HAKKO AH-915 portable soldering iron for hobbyists. Has a folding heater cover to safely transport a hot iron. Includes a 3/16" chisel tip ideal for copper foil soldering.  Unit: EACH	TSH6015	[ 0.4 lb. ]
		Weller 45watt Soldering Iron Kit Includes Weller/Ungar 7760 red handle, 4033S 1000º screw-in heater with integral tapered chisel tip.  Unit: EACH	TSG4500	[ 0.4 lb. ]
		UNGAR 50 Watt Soldering Iron Kit Includes Weller/Ungar #7760 red handle, #37 1100º screw-in heater with #PL-133 removable 3/16” tapered chisel tip.  Unit: EACH	TSU5000	[ 0.4 lb. ]
		Soldering Iron 4033S Heater/Tip Weller/Ungar #4033S modular 45 watt 1000º heater/tip. Fits #7760 handle. Screw in modular heater, integral tapered chisel tip (~5/16"). Replacement heater/tip for iron TSG4500.  Unit: EACH	TSF2442	[ 0.1 lb. ]
		Soldering Iron No.33 Heater/Tip Weller/Ungar #33 high performance 50 watt 1100º modular heater/tip for #7760 red handle. Screw in modular heater with integral tapered chisel tip (~5/16").  Unit: EACH	TSF2662	[ 0.1 lb. ]
		Soldering Iron 4037S Heater Only Weller/Ungar #4037S screw-in modular 45 watt heater only. Fits Ungar #7760 red handle. Same as #4033S, but allows interchangeable tips (sold separately).  Unit: EACH	TSF2552	[ 0.1 lb. ]
		Soldering Iron No.37 Heater Only Weller/Ungar #37 high performance 50 watt 1100º modular heater for #7760 handle. Screw in modular heater. Same as #33, but allows changeable tips (sold separately).  Unit: EACH	TSF2772	[ 0.1 lb. ]
		Soldering Iron PL-113 TIP ONLY Weller/Ungar #PL-113 interchangeable thread-on tip for the #4037S or #37 heaters. 1/8” standard chisel tip.  Unit: EACH	TST5426	[ < 0.1 lb. ]
		Soldering Iron PL-151 TIP ONLY Weller/Ungar #PL-151 interchangeable thread-on tip for the #4037S or #37 heaters. 1/8” tapered chisel tip.  Unit: EACH	TST5437	[ < 0.1 lb. ]
		Soldering Iron No.PL-133 Tip Only Weller/Ungar #PL-133 interchangeable thread-on tip for the #4037S or #37 heaters. 3/16” screwdriver chisel tip.  Unit: EACH	TST3548	[ < 0.1 lb. ]
		Soldering Iron PL-153 TIP ONLY Weller/Ungar #PL-153 interchangeable thread-on tip for the #4037S or #37 heaters. 3/16” chisel tip.  Unit: EACH	TST3559	[ < 0.1 lb. ]
		Soldering Iron PL-350 TIP ONLY Weller/Ungar #PL-350 interchangeable thread-on tip for the #4037S or #37 heaters. 3/8” chisel tip.  Unit: EACH	TST3560	[ < 0.1 lb. ]
		Soldering Iron TIP ANTI-SEIZE Specially formulated lubricant for use on metals at high temperatures. Reduces soldering iron tip thread seizure. Use regularly on your iron’s threads. Comes in syringe.  Unit: EACH	TSA6549	[ 0.1 lb. ]
		Weller/Ungar Soldering Iron Stand Weller/Ungar #8000 soldering iron holder. Designed for Ungar (now Weller) modular soldering irons (Ungar type irons with screw-in heater-tips.)  Unit: EACH	TSG7532	[ 0.7 lb. ]
		Soldering Iron Weller SPG80 watt WELLER SPG-80 Comfortable iron for the hobbyist. 80 watts. Can use temperature controller or just keep soldering continuously! Unplug when not soldering. Now comes with a power indicator light to remind you it is on.  Unit: EACH	TSW8000	[ 0.8 lb. ]
		Replacement TIP, SPG80 (1/4 in.) PLATO #64-1059 1/4" SMALL chisel tip. Replacement tip only for the Weller SPG-80 iron. This is a higher quality tip than Weller's MTG-21 , works better, and lasts longer!  Unit: EACH	TSW8025	[ 0.1 lb. ]
		Replacement TIP, SPG80 (3/8 in.) PLATO #66-1290 3/8" LARGE chisel tip. Replacement tip only for the Weller SPG-80 iron. This is a higher quality tip than Weller's MTG-20 , works better, and lasts longer!  Unit: EACH	TSW8375	[ 0.1 lb. ]
		$ Soldering Iron WELLER W100 watt This is NOW ON SALE ($) at shown price. WELLER W-100 Automatic temperature controlled iron. Keeps the tip at the ideal temperature for continuous soldering. 100 watt heater. Comes with 3/8" tip, 700 degree F. See Addt'l Information for more data.  Unit: EACH	TSW1100	[ 0.8 lb. ]
		Replacement TIP for W100 (1/8 in.) PLATO #6C-3219-7 1/8” SMALL chisel tip, 700 deg. Replacement tip only for the Weller W-100 automatic temperature controlled iron.  Unit: EACH	TST1250	[ 0.1 lb. ]
		Replcmnt TIP for W100 (3/16 in.) PLATO #6C-3220-7 3/16” chisel tip, 700 deg. Replacement tip only for the Weller W-100 automatic temperature controlled iron. Ideal for foil work.  Unit: EACH	TST1875	[ 0.1 lb. ]
		Replacement TIP for W100 (1/4 in.) PLATO #6C-3221-7 1/4” chisel tip, 700 deg. Replacement tip only for the Weller W-100 automatic temperature controlled iron.  Unit: EACH	TST2500	[ 0.1 lb. ]
		Replacement Tip, W100 (3/8) 700 degree F PLATO #6C-1083-7 3/8” chisel tip, 700 deg. for normal soldering of lead cames. Replacement tip only for the Weller W-100 automatic temperature controlled iron.  Unit: EACH	TST3755	[ 0.1 lb. ]
		Replacement Tip, W100 (3/8) 800 degree F PLATO #6C-1083-8 3/8” chisel tip, 800 deg. for production soldering of lead cames. Replacement tip only for the Weller W-100 automatic temperature controlled iron.  Unit: EACH	TST3750	[ 0.1 lb. ]
		WELLER GT-7A Soldering GUN This soldering iron gun has a fast heating tip for use in making quick repairs. Power head has 3/16” chisel tip. (Note: This gun is not recommended for continuous heavy duty use since the life of the tip can be relatively short when used continuously and is expensive to replace.)  Unit: EACH	TSG7225	[ 0.5 lb. ]
		Soldering Iron GT-7A HEAD ONLY WELLER Replacement head for the model GT-7A soldering gun. 3/16” chisel tip.  Unit: EACH	TSD2641	[ 0.2 lb. ]
		PRO SOLDERING IRON STAND PRO Made specifically for use with the Weller W-100 or SPG-80 iron. Also fits some Hakko irons like #503, #456. Includes sponge. Click PICTURE for irons that fit this stand.  Unit: EACH	TSP6578	[ 1.8 lbs. ]
		SOLDERING IRON SPONGE ONLY Replacement sponge for soldering iron stand TSP6578. Specially designed micro pores for soldering iron stands so molten solder doesn’t bounce back.  Unit: EACH	TSS9542	[ < 0.1 lb. ]
		Sponge and Tray for Soldering Iron GLASTAR Kleen-Tip cleaning sponge & tray. Special small pocket sponge for keeping tips free of corrosion.  Unit: EACH	TSG3589	[ 0.1 lb. ]
		TIP CLEANER WITH TRAY HAKKO This soldering iron tip cleaner has a brass wire scrubber to keep your tip in tiptop shape.  Unit: EACH	TSC3500	[ 0.1 lb. ]
		TIP CLEANER Replacement WIRE Replacement Brass Wire “sponge” for Hakko tip cleaner. ( TSC3500 )  Unit: EACH	TSR3550	[ 0.1 lb. ]
		FUME TRAP INLAND A workbench fume trap that passes soldering fumes through activated carbon filter up to 14 inches away from your work. A must if you solder in a small room.  Unit: EACH	TSF6001	[ 4 lbs. ]
		FUME TRAP FILTERS (3) INLAND Replacement filters for the Inland FumeTrap benchtop fume remover. Pack of 3 activated carbon filters -- snaps into rear of FumeTrap. Keep some handy.  Unit: PACK of 3	TSF6002	[ 0.2 lb. ]